Fire Action Notices: What to Include and Where to Put Them
A fire action notice tells people what to do if they discover a fire or hear the fire alarm. It is one of the most common fire safety signs in UK workplaces, shops, schools, offices and the common areas of flats, and it is usually placed next to fire alarm call points and at exits. A good notice is short, clear and specific to the building.
Is a fire action notice a legal requirement?
The Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to have emergency procedures and to give employees and others clear information about what to do in a fire. It does not name a fire action notice specifically, but a notice is one of the most practical ways to provide that information to everyone in the building, including visitors and contractors who have not had a fire safety briefing. Most fire risk assessments recommend or require them, and fire authorities expect to see them.
Equivalent duties apply in Scotland under the Fire (Scotland) Act 2005 and in Northern Ireland under the Fire and Rescue Services (Northern Ireland) Order 2006.
What a fire action notice should include
A typical notice covers two situations: discovering a fire, and hearing the alarm.
If you discover a fire
- Raise the alarm immediately by operating the nearest fire alarm call point.
- Call the fire and rescue service on 999, if this is your building's procedure.
- Only tackle the fire if you are trained and it is safe to do so.
On hearing the fire alarm
- Leave the building by the nearest available exit.
- Close doors behind you.
- Do not use the lifts, unless they are designated evacuation lifts.
- Do not stop to collect personal belongings.
- Go to the assembly point, and name it on the notice.
- Do not re enter the building until told it is safe to do so.
Some notices also include the location of the nearest phone, the name of the fire marshal or responsible person, and specific instructions such as how to use an evacuation chair or what to do in a refuge.
Tailor it to your building
Generic notices are better than none, but a fire action notice works best when it reflects your actual procedures:
- Name the assembly point, for example "Car park at the front of the building".
- Say who calls the fire service. In some buildings, a monitoring company or reception does this.
- Reflect your evacuation strategy. Some buildings, particularly purpose built blocks of flats, have a stay put strategy, where residents not directly affected by a fire stay in their flats unless told to leave. Others have a simultaneous evacuation strategy. The notice must match.
- Mention people who need help to evacuate, such as those with personal emergency evacuation plans.
- Include site specific hazards, such as gas cylinders or chemical stores.
Our fire action notice sign covers the standard actions, and our custom sign builder lets you add your assembly point and building specific instructions.
Where to display fire action notices
- Next to every fire alarm call point. This is the most common place and the most useful, because it is where someone who has discovered a fire will be.
- At final exits and main entrances.
- In reception areas and staff rooms.
- In the common parts of blocks of flats, such as entrance halls and stair lobbies.
- In hotel bedrooms and similar sleeping accommodation, usually on the back of the bedroom door with a floor plan.
Mount notices at eye level, typically with the centre around 1.5 metres from the floor, where they are easy to read and not blocked.
Design tips
- Keep it short. People will glance at it, not study it.
- Use clear headings, such as "If you discover a fire" and "On hearing the alarm".
- Use the standard format. Fire action notices are typically white with a blue header and the words "Fire action", which makes them instantly recognisable.
- Use plain English. Avoid jargon.
- Consider other languages if many of your staff or visitors do not read English well.
- Use photoluminescent versions where lighting may fail.
Fire action notices in blocks of flats
Under the Fire Safety (England) Regulations 2022, responsible persons for residential buildings with two or more flats must provide residents with fire safety instructions, including how to report a fire and the evacuation strategy for the building. A clear fire action notice in the entrance and on each floor helps meet that duty, especially where the strategy is stay put. Instructions should be displayed in a conspicuous part of the building.
Keep it up to date
Review your fire action notices:
- after a fire risk assessment review
- if the assembly point changes
- after building alterations
- if the evacuation strategy changes
- if notices are damaged, faded or removed
Out of date instructions, such as an old assembly point, can cause confusion in a real emergency.
Related signs
Fire action notices work alongside other fire safety signs:
- fire alarm call point signs to show where call points are
- fire exit signs along escape routes
- fire extinguisher signs at each extinguisher
- fire door signs
- a fire assembly point sign outside
Our fire safety sign pack includes a core set, and our guide to fire safety signs explains the full picture.
Example wording
Here is an example of a simple, tailored fire action notice for a small office. Adapt it to your own building and procedures.
Fire action
If you discover a fire
- Raise the alarm by breaking the glass at the nearest fire alarm call point.
- Leave the building by the nearest available exit.
- Call 999 once you are safe outside.
On hearing the fire alarm
- Leave the building immediately by the nearest exit.
- Do not use the lift.
- Do not stop to collect belongings.
- Close doors behind you.
- Go to the assembly point: the car park opposite the main entrance.
- Report to the fire marshal.
- Do not re enter until told it is safe.
Keep wording short so it fits on a standard sign and can be read in seconds.
Fire drills
A notice is only part of preparing people. Most workplaces should carry out a fire drill at least once a year, and more often in higher risk premises or where staff change frequently. Use the drill to check that people know the notice, recognise the alarm, use the right exits and go to the right assembly point. Record the results and fix any problems.
People who need help to evacuate
If anyone in your building needs help to evacuate, such as people with mobility, sight or hearing impairments, a personal emergency evacuation plan should set out how they will get out. Make sure your fire action notice does not contradict those plans, and that staff know about refuges, evacuation chairs and any other arrangements.
Key points
- Place a notice next to every fire alarm call point and at exits.
- Tailor it to your building, including the assembly point and evacuation strategy.
- Keep the wording short, clear and in plain English.
- Review it after any change to the building or procedures.
Quick answers
Do I need a fire action notice? Fire safety law requires you to give people information about what to do in a fire. A fire action notice is the standard way to do this and most fire risk assessments require them.
Where should fire action notices go? Next to fire alarm call points, at exits, in reception and staff areas, and in the common parts of flats.
What should a fire action notice say? How to raise the alarm, who calls the fire service, how to leave, not to use lifts or collect belongings, where the assembly point is, and not to re enter until told it is safe.
Can I write my own? Yes. A notice tailored to your building, including your assembly point and evacuation strategy, is better than a generic one.
Common questions
Is a fire action notice a legal requirement?
The law requires you to give people clear information on what to do in a fire. It does not name a fire action notice, but it is the standard way to meet the duty and most fire risk assessments require one.
Where should a fire action notice be displayed?
Next to every fire alarm call point, at final exits and main entrances, in reception and staff areas, and in the common parts of blocks of flats.
What should be on a fire action notice?
How to raise the alarm, who calls 999, how to leave the building, not using lifts or stopping for belongings, the assembly point, and not re entering until told it is safe.
Should a fire action notice include the assembly point?
Yes. Naming the actual assembly point makes the notice far more useful than a generic version.
More guides
- CCTV Signs: UK Legal Requirements and What to Include
- No Smoking Signs: The Law in England, Scotland, Wales and Northern Ireland
- Fire Exit Signs: UK Requirements, Arrows and Placement
- Fire Door Signs: Which Ones You Need and Where
- First Aid Signs: UK Requirements and Where to Put Them
- COSHH Hazard Symbols: The Nine Pictograms and What They Mean
- Health and Safety (Safety Signs and Signals) Regulations 1996 Explained
- Electrical Warning Signs: Danger of Death, Voltage and Isolation Labels
- Fire Extinguisher Signs and Colours: Types, Labels and Placement
- Construction Site Signage: What You Need on Site
- Fire Safety Signs: A Plain Guide to UK Requirements
- Photoluminescent Safety Signs: When You Need Glow in the Dark
- What Size Safety Sign Do I Need?
- Safety Sign Symbols and What They Mean
- Safety Sign Colours and Meanings: The Five Types Explained
- Safety Sign Materials Compared: Vinyl, Rigid, Foamex, Aluminium, Glow and Reflective