Fire Exit Signs: UK Requirements, Arrows and Placement
Fire exit signs show people the way out when there is a fire or other emergency. They are one of the most important signs in any building, because in smoke, darkness or panic, people need clear, consistent directions to a place of safety. UK law requires escape routes and exits to be signed, and the way signs are designed and placed is set out in British and international standards.
The law
The Regulatory Reform (Fire Safety) Order 2005 applies to almost all non domestic premises in England and Wales, including the common parts of blocks of flats. It requires the responsible person to make sure emergency routes and exits are indicated by signs. Scotland and Northern Ireland have equivalent fire safety laws.
The Health and Safety (Safety Signs and Signals) Regulations 1996 require safety signs wherever a risk cannot be adequately controlled by other means, and they include fire exit and escape route signs as safe condition signs, green and white.
Your fire risk assessment should identify which signs are needed and where. See our guide to fire safety signs.
The standards
- BS EN ISO 7010 sets out the registered safety sign symbols, including the running man fire exit symbols.
- BS 5499 4 covers escape route signing: where to put signs, how arrows work, and viewing distances.
- BS 5266 covers emergency lighting, which must make signs visible if the normal lighting fails.
The running man symbol
Modern fire exit signs show a green rectangle with a white running figure heading towards a doorway, plus a directional arrow. Under ISO 7010 the symbols are coded E001 for an emergency exit to the left and E002 for an emergency exit to the right. They are usually combined with an arrow and the words "Fire exit".
Older signs in the UK showed a different running man design and sometimes text alone. Mixing old and new styles in the same building can confuse people, so when you update signs, replace them consistently along each route. See our fire exit signs range for current ISO 7010 designs, including the emergency exit left hand and right hand signs.
What the arrows mean
Under BS 5499 4, arrows tell people which way to go:
- Arrow pointing up: go straight on, forward from here, including through a door ahead.
- Arrow pointing left or right: go left or right.
- Diagonal arrows pointing up: go forward and to the left or right.
- Arrow pointing down: go down, used for example on stairs, together with the running man direction showing down the stairs.
- Diagonal arrows pointing down: go down to the left or right.
The running man should face the same way as the arrow. A sign above the final exit door, with no arrow, tells people this is the way out.
Where to put fire exit signs
- Above every final exit door that leads to a place of safety.
- Along the whole escape route, so that from any point on the route, at least one sign is visible.
- At every change of direction, such as corridor junctions, corners and stairs.
- Where there is any doubt about which way to go, such as at doors leading off corridors or in open plan areas.
- On doors along the route, where people need to pass through them.
- Not on doors that are not escape routes, which can mislead people.
Signs should be mounted where they can be seen easily, usually above head height on walls or hanging from ceilings in open areas, and not blocked by displays, stock, signs or open doors.
Size and viewing distance
The bigger the space, the larger the sign needs to be. BS 5499 4 links sign size to the maximum viewing distance. As a rough guide, larger signs are needed in warehouses, large open plan offices and halls. Our guide to safety sign sizes explains how to work out the size you need.
Lighting and photoluminescent signs
If the power fails during a fire, normal lighting may go out, and smoke can make it hard to see. Escape route signs must remain visible, which means one of:
- Emergency lighting that illuminates the signs if the power fails, designed under BS 5266.
- Internally illuminated signs, such as maintained emergency exit signs.
- Photoluminescent signs, which glow in the dark after being charged by normal light.
Photoluminescent signs are a cost effective way to add visibility and are widely used alongside emergency lighting. See our guide to photoluminescent signs.
Other escape route signs
Many buildings need additional signs alongside the main fire exit signs:
- Fire exit keep clear signs on the outside of exit doors to stop people blocking them. See our fire exit keep clear sign.
- Push bar to open or push pad to open signs on doors with panic hardware.
- Fire assembly point signs outside. See our evacuation assembly point sign.
- Refuge and emergency exit for people unable to walk signs where evacuation chairs or refuges are provided. See our exit for people unable to walk sign.
- Fire door keep shut signs on fire doors along the route. See our guide to fire door signs.
Common mistakes
- Gaps in the route, where people lose sight of the next sign.
- Wrong arrow directions after an office layout has changed.
- Mixed old and new styles on the same route.
- Signs blocked by displays, partitions or stock.
- Exit signs on doors that are locked or do not lead to safety.
- No signs outside, leaving people unsure where to go once out of the building.
- Signs not lit or photoluminescent in areas without natural light.
Checking your signs
Walk every escape route as if you had never been in the building. From each point, can you see a sign? Does each sign point the right way? Is it lit or photoluminescent? Then check the routes again after any refurbishment, layout change or new partition. Record the check as part of your fire safety records.
Fire exit signs in different buildings
Small shops and offices. Often one or two final exits. A sign above each final exit and signs along any corridor leading to them are usually enough, with directional signs where the route is not obvious.
Large open plan offices and warehouses. Hanging signs, often double sided, help people see exits over desks, racking and partitions. Larger signs are needed because of the viewing distances.
Blocks of flats. Signs in common corridors and stairs, consistent with the building's evacuation strategy. In many purpose built blocks, residents follow a stay put strategy unless told otherwise, but escape routes must still be clearly signed for when evacuation is needed.
Schools and healthcare. People may be unfamiliar with the building or need help to evacuate. Signs for refuges, evacuation lifts and routes for people unable to walk may be needed.
Construction sites. Escape routes change as work progresses, so temporary signs must be moved and updated as the site develops. See our guide to construction site signs.
Final exit doors
Final exits should be easy to open from the inside without a key. Doors with panic bars or push pads should carry the relevant "Push bar to open" or "Push pad to open" signs. On the outside, "Fire exit keep clear" signs help stop people parking or storing items in front of the door. Make sure the area outside leads to a place of safety, not a locked yard or enclosed space.
Key points
- Fire safety law requires escape routes and exits to be signed.
- Use ISO 7010 running man symbols with arrows that follow BS 5499 4.
- Make sure a sign is visible from every point on the route.
- Signs must stay visible if the lights fail.
Quick answers
Are fire exit signs a legal requirement? Yes. Fire safety law requires emergency routes and exits to be indicated by signs in non domestic premises.
What colour are fire exit signs? Green and white, as safe condition signs.
What does an upward arrow on a fire exit sign mean? Go straight on from here.
Do fire exit signs need to be illuminated? They must remain visible if the normal lighting fails, through emergency lighting, illuminated signs or photoluminescent signs, depending on your fire risk assessment.
Common questions
Are fire exit signs a legal requirement in the UK?
Yes. The Regulatory Reform (Fire Safety) Order 2005 requires emergency routes and exits to be indicated by signs, and equivalent laws apply in Scotland and Northern Ireland.
What does the up arrow mean on a fire exit sign?
Under BS 5499 4, an upward arrow means go straight on, forward from where you are, including through a door ahead.
Where should fire exit signs be placed?
Above every final exit, along the whole escape route so a sign is always visible, at every change of direction, and anywhere people might be unsure which way to go.
Do fire exit signs need to glow in the dark?
They must stay visible if the lights fail. That can be achieved with emergency lighting, illuminated signs or photoluminescent signs, as decided by your fire risk assessment.
More guides
- CCTV Signs: UK Legal Requirements and What to Include
- No Smoking Signs: The Law in England, Scotland, Wales and Northern Ireland
- Fire Door Signs: Which Ones You Need and Where
- Fire Action Notices: What to Include and Where to Put Them
- First Aid Signs: UK Requirements and Where to Put Them
- COSHH Hazard Symbols: The Nine Pictograms and What They Mean
- Health and Safety (Safety Signs and Signals) Regulations 1996 Explained
- Electrical Warning Signs: Danger of Death, Voltage and Isolation Labels
- Fire Extinguisher Signs and Colours: Types, Labels and Placement
- Construction Site Signage: What You Need on Site
- Fire Safety Signs: A Plain Guide to UK Requirements
- Photoluminescent Safety Signs: When You Need Glow in the Dark
- What Size Safety Sign Do I Need?
- Safety Sign Symbols and What They Mean
- Safety Sign Colours and Meanings: The Five Types Explained
- Safety Sign Materials Compared: Vinyl, Rigid, Foamex, Aluminium, Glow and Reflective