Fire Extinguisher Signs and Colours: Types, Labels and Placement
Every fire extinguisher needs a sign. A location sign shows people where the extinguisher is, and an identification sign explains which fires it can and cannot be used on. Getting this right can be the difference between putting out a small fire and making it worse. This guide explains extinguisher colours, the signs that go with them, and where to put them.
Extinguisher colour codes
Since the introduction of BS EN 3, fire extinguishers in the UK have a red body, with a coloured band or panel showing the type of extinguishing agent:
- Red: water. For Class A fires, involving solids such as wood, paper and textiles. Not for electrical fires or burning fat.
- Cream: foam. For Class A and Class B fires, involving solids and flammable liquids such as petrol and paint.
- Blue: dry powder. For Class A, B and C fires, including flammable gases, and often electrical fires. Not recommended in enclosed spaces, because the powder can be inhaled and reduces visibility.
- Black: carbon dioxide (CO2). For electrical fires and Class B flammable liquids. Leaves no residue, so it is common near computers and electrical equipment.
- Yellow: wet chemical. For Class F fires, involving cooking oils and fats, as in commercial kitchens.
Some specialist extinguishers, such as water mist and lithium battery extinguishers, have their own labels. Always read the label on the extinguisher itself.
Fire classes
- Class A: solids, such as wood, paper, cloth and plastics.
- Class B: flammable liquids, such as petrol, oils, solvents and paints.
- Class C: flammable gases, such as propane and butane.
- Class D: flammable metals, such as magnesium and aluminium powder.
- Electrical: fires involving live electrical equipment. Electricity is not a class in itself, because once the power is off the fire becomes another class.
- Class F: cooking oils and fats.
The signs each extinguisher needs
A location sign. A red square sign with a white fire extinguisher symbol, ISO 7010 code F001, placed above or beside the extinguisher so it can be seen from a distance. This tells people where the extinguisher is. See our fire extinguisher sign.
An identification sign. A sign showing the type of extinguisher, its colour band, the classes of fire it is suitable for, and a clear warning of where it must not be used, such as "Do not use on electrical fires" or "Do not use on cooking oil fires". This helps people pick the right extinguisher in a hurry.
Many businesses combine the two in a single sign above each extinguisher. In larger premises, fire point signs mark a group of firefighting equipment, such as extinguishers, a call point and a fire action notice, together.
Other related signs include fire alarm call point signs, wheeled fire extinguisher signs and fixed extinguishing system signs, such as our fixed fire extinguishing installation sign.
Where to put fire extinguishers and signs
The British Standard for siting and maintaining portable extinguishers, BS 5306 8, recommends:
- On escape routes, near exits, so people can pick one up on the way out or use it while keeping an exit behind them.
- Near specific hazards, such as kitchens, electrical equipment, fuel and chemical stores.
- At fire points, grouped with call points and fire action notices.
- In consistent positions on each floor, so people know where to look.
- So no one has to travel too far to reach one, typically no more than 30 metres from any point.
Extinguishers should be mounted on brackets or stands, not left on the floor where they can be knocked over or used as door stops. As a guide, heavier extinguishers are usually mounted with the handle about 1 metre from the floor, and lighter ones with the handle about 1.5 metres from the floor.
Signs should be fixed above the extinguisher, typically around 1.5 to 2 metres high, where they can be seen over furniture and people.
Which extinguishers do you need?
Your fire risk assessment decides the type and number of extinguishers. As a rough guide:
- Offices: water or foam for general fires, plus CO2 near electrical equipment.
- Shops: water or foam, plus CO2 near tills and electrical equipment.
- Commercial kitchens: wet chemical for fryers, plus CO2 for electrical equipment, and a fire blanket.
- Workshops and garages: foam or powder for flammable liquids, plus CO2.
- Construction sites: depends on the hazards, often foam and CO2.
Our guide to fire safety signs covers the full set of fire signs most premises need.
Maintenance
Under the Regulatory Reform (Fire Safety) Order 2005, firefighting equipment must be maintained in efficient working order. In practice:
- Monthly, check extinguishers are in place, undamaged, with tamper seals intact and pressure gauges in the green.
- Annually, have them serviced by a competent person.
- Periodically, have extended services or discharge tests as required by the extinguisher type.
Check signs at the same time, and replace any that are faded, damaged or missing.
Training
Extinguishers are only useful if people know how and when to use them. Train staff in:
- the types of extinguisher and their colour codes
- which fires each can be used on
- the PASS method: pull the pin, aim at the base of the fire, squeeze the handle, sweep from side to side
- when not to fight a fire: if it is spreading, if smoke is building, if your escape route is threatened, or if you are not confident
The priority is always to raise the alarm and get out safely.
Choosing your signs
- Material: rigid plastic for most indoor walls, aluminium composite or outdoor grade plastic outside, and photoluminescent versions on escape routes.
- Size: large enough to be seen from across the room. See our guide to safety sign sizes.
Browse our full range of fire safety signs, or the fire safety sign pack.
Fire blankets
Fire blankets are used to smother small fires, especially in kitchens, and to wrap a person whose clothing is on fire. They should be mounted near the cooker but not directly above it, so they can be reached safely. A fire blanket location sign, red with a white symbol, should be placed above it. Train staff to protect their hands with the blanket, place it over the fire, turn off the heat source if safe, and leave it in place to cool.
Extinguishers in vehicles
Many businesses carry extinguishers in vans and lorries, particularly those transporting dangerous goods, where specific rules apply. Secure the extinguisher in a bracket so it cannot become a projectile in a crash, and mark its location with a small sign if it is not obvious.
Old and non standard extinguishers
Older extinguishers that are entirely coloured, such as all black or all blue bodies, are from before the current standard. They should be replaced at their next service with compliant red bodied extinguishers. Mixing old and new styles can confuse people, so update signs at the same time.
Lithium battery fires
Fires involving lithium ion batteries, such as those in e bikes, scooters, power tools and laptops, are increasingly common and difficult to put out. Specialist extinguishers are available, and some businesses use dedicated storage and charging areas. Your fire risk assessment should consider battery charging, and signs can remind people where charging is and is not allowed.
Key points
- Every extinguisher needs a location sign, and ideally an identification sign.
- Colour bands: red water, cream foam, blue powder, black CO2, yellow wet chemical.
- Mount extinguishers on escape routes and near hazards, never on the floor.
- Check monthly and service annually.
Quick answers
What colour is a CO2 extinguisher? Red with a black band or label.
What colour is a foam extinguisher? Red with a cream band.
Does every extinguisher need a sign? Yes. A location sign above it, and ideally an identification sign showing its type and use.
How high should a fire extinguisher sign be? Typically around 1.5 to 2 metres from the floor, above the extinguisher, so it can be seen over furniture.
Common questions
What are the UK fire extinguisher colour codes?
All extinguishers are red with a coloured band: red for water, cream for foam, blue for dry powder, black for CO2 and yellow for wet chemical.
Does every fire extinguisher need a sign?
Yes. A location sign shows where it is, and an identification sign explains which fires it can and cannot be used on.
Where should fire extinguishers be placed?
On escape routes near exits, near specific hazards, at fire points, and so nobody needs to travel more than about 30 metres to reach one.
Which extinguisher should be used on an electrical fire?
A CO2 extinguisher is commonly used. Never use water or foam on live electrical equipment unless the extinguisher is specifically rated for it.
More guides
- CCTV Signs: UK Legal Requirements and What to Include
- No Smoking Signs: The Law in England, Scotland, Wales and Northern Ireland
- Fire Exit Signs: UK Requirements, Arrows and Placement
- Fire Door Signs: Which Ones You Need and Where
- Fire Action Notices: What to Include and Where to Put Them
- First Aid Signs: UK Requirements and Where to Put Them
- COSHH Hazard Symbols: The Nine Pictograms and What They Mean
- Health and Safety (Safety Signs and Signals) Regulations 1996 Explained
- Electrical Warning Signs: Danger of Death, Voltage and Isolation Labels
- Construction Site Signage: What You Need on Site
- Fire Safety Signs: A Plain Guide to UK Requirements
- Photoluminescent Safety Signs: When You Need Glow in the Dark
- What Size Safety Sign Do I Need?
- Safety Sign Symbols and What They Mean
- Safety Sign Colours and Meanings: The Five Types Explained
- Safety Sign Materials Compared: Vinyl, Rigid, Foamex, Aluminium, Glow and Reflective